Waterjet Doctor

How does the size of the intensifier pump affect the cutting speed?

The size of the intensifier pump can have a significant impact on the cutting speed of a water jet cutting system. Generally speaking, larger intensifier pumps can provide higher pressure and flow rates, which can result in faster cutting speeds and greater cutting power.

Intensifier pumps are typically rated based on their maximum pressure and flow rates. The maximum pressure of an intensifier pump can range from around 60,000 psi to over 90,000 psi, while the maximum flow rate can range from around 0.5 gallons per minute (gpm) to over 4.0 gpm.

When selecting an intensifier pump, it is important to consider the thickness and type of material being cut, as well as the desired cutting speed and accuracy. Thicker and harder materials may require a higher pressure and flow rate to achieve the desired cutting speed, while softer materials may require lower pressure and flow rates to avoid damage to the material.

IMG_1832.JPG

In general, larger intensifier pumps can provide higher pressure and flow rates, which can result in faster cutting speeds and greater cutting power. However, larger intensifier pumps also tend to be more expensive and may require more maintenance than smaller pumps. Additionally, larger pumps may require more space and power to operate, which can be a consideration when selecting a water jet cutting system for a particular application.

IMG_1853.JPG

Overall, the size of the intensifier pump is an important factor to consider when selecting a water jet cutting system. By selecting an intensifier pump with the appropriate pressure andflow rate for the specific application, it is possible to achieve faster cutting speeds and greater cutting power. However, the size of the intensifier pump should also be balanced against other factors, such as cost, maintenance requirements, and space and power limitations, to ensure the best overall performance and efficiency of the water jet cutting system.

MaterialThickness0.33mm orifice
320Mpa380Mpa
Aluminum0.25"(6mm)400-520mm460-590mm
0.50"(13mm)300-800mm350-420mm
0.75"(19mm)220-280mm260-380mm
Stainless steel0.25"(6mm)200-260mm240-310mm
0.50"(13mm)80-120mm100-150mm
0.76"(20mm)50-65mm70-90mm
1.18"(30mm)15-25mm30-40mm
Glass0.25"(6mm)1200-1400mm1600-1900mm
0.39"(10mm)600-700mm700-800mm
0.79"(20mm)330-400mm400-500mm
Marble0.24"(10mm)1000-1200mm1200-1400mm
0.79"(20mm)400-500mm600-700mm
1.18"(30mm)220-300mm310-380mm
1.97"(50mm)70-90mm100-120mm
Tile0.59"(15mm)1200-1400mm1400-1500mm
Copper plate0.20"(5mm)500-600mm700-800mm
0.59"(15mm)190-220mm220-300mm
1.18"(30mm)80-100mm100-120mm


PREVIOUS:How thick of metal can a water jet cut?

NEXT:How accurate can a water jet cut?

Leave a message

Facebook

Twitter

LinkedIn

+86-17319188243

https://www.tiktok.com/@wwaterjet

whatsapp

[email protected]