Precautions for Using WaterJet Cutting Machines

Using a waterjet cutting machine is safer than some other cutting methods, but it still requires careful attention to precautions. Win-Win Waterjet Company reminds you that the key areas to focus on include wearing appropriate personal protective equipment (PPE), understanding and following safety operating procedures, and ensuring proper machine maintenance.

Personal Protective Equipment (PPE):

1. Eye protection:

Wear goggles or a face shield to prevent abrasive or debris from splashing out and injuring your eyes.

2. Hearing protection:

The waterjet cutting machine may exceed 85dB. Wear earplugs or earmuffs to prevent potential hearing damage.

3. Skin protection:

It is recommended to use gloves, protective clothing, and safety shoes to protect the skin from the harm of high-pressure water flow and abrasive particles. Do not wear gloves when contacting rotating parts.

Operating Procedures for WaterJet Cutting Machine:

1. Before starting

Check the hydraulic oil level, water tank water level, and ensure sufficient abrasive material (if adding abrasive material for cutting). Confirm that PPE is worn properly, then start the waterjet cutting machine.

2. After stopping

Reduce pressure to 0 PSI before turning off the power supply, drain the residual water from the pipeline to avoid freezing or corrosion of the pipeline.

3. Operating Procedures

A.Proper loading and unloading, use appropriate lifting equipment to handle materials, especially around the cutting board, to avoid cutting or injury.

B.When operating, do not aim the nozzle at your body. Keep your hands away from the cutting head.

C.When operating, maintain a safe target distance. A nozzle that is too close is prone to rebound and injure people.

D.Ensure the safety of the workpiece, secure and stabilize the cutting material to prevent it from moving during the cutting process.

E.Know the location of the emergency stop button and be prepared to use it when needed.

F.Keep the working area of the waterjet cutting machine clean and properly dispose of any waste or debris.

Maintenance of WaterJet Cutting Machine

Regularly inspect the high-pressure system, nozzle, and abrasive system for wear. Replace worn parts in time to ensure cutting accuracy. Follow the manufacturer's recommendations for maintenance and operation. Only trained and qualified personnel can operate the waterjet cutting machine. If you need information on the maintenance of waterjey cutting machines, Winwin is more than willing to assist you.