Techni Waterjet 110-1-1240 Socket Head Cap Screw

The TECHNI Waterjet 110-1-1240 Socket Head Cap Screw is a specific type of fastener used in TECHNI waterjet cutting systems. Socket head cap screws are designed for applications where high strength and precision are required.

Key Aspects of the TECHNI Waterjet 110-1-1240 Socket Head Cap Screw

1. Material:

• High-Grade Alloy Steel: These screws are typically made from high-strength materials such as alloy steel, which provides excellent mechanical properties including high tensile strength and durability.

• Stainless Steel: In some cases, stainless steel may be used for its corrosion resistance, especially in environments where the screw is exposed to water and other corrosive substances.

2. Dimensions:

• The specific dimensions of the screw, such as diameter, length, and thread pitch, are crucial for ensuring a proper fit and function within the assembly. The part number 110-1-1240 will correspond to precise measurements that should match the requirements of the waterjet system component it is used with.

3. Head Type:

• Socket Head: This type of screw has a cylindrical head with a hexagonal drive hole. It requires an Allen wrench or hex key for installation and removal, allowing for a secure and flush fit in tight spaces.

4. Usage:

• Socket head cap screws are used in applications where precise tightening and high clamping force are needed. They are often used in machinery, automotive, and other industrial applications, including waterjet cutting systems.

Maintenance Tips for Socket Head Cap Screws

1. Regular Inspection:

• Periodically inspect the screws for signs of wear, corrosion, or damage. Replace any screws that show signs of degradation to maintain the integrity of the assembly.

2. Proper Installation:

• Use the correct size Allen wrench or hex key to avoid stripping the hex drive. Ensure the screw is tightened to the specified torque to prevent over-tightening or under-tightening, which can lead to mechanical failures.

3. Lubrication:

• Apply appropriate thread lubricants or anti-seize compounds if recommended by the manufacturer. This helps to prevent galling and makes future removal easier.

4. Corrosion Protection:

• If the screws are used in corrosive environments, consider using screws with protective coatings or materials that offer higher corrosion resistance, such as stainless steel.

Troubleshooting Common Issues

1. Stripped Heads:

• If the hex drive becomes stripped, use a properly fitting hex key and ensure it is fully seated before applying torque. If a screw is already stripped, use extraction tools designed for removing damaged screws.

2. Corrosion:

• In environments prone to corrosion, regularly check the screws and replace any that show significant rust or degradation. Use corrosion-resistant screws if possible.

3. Loose Screws:

• Regularly check the screws for tightness, especially in high-vibration environments. Use thread-locking compounds if necessary to prevent loosening.

If you are interesting in TECHNI Waterjet,Contact us any time.