05116561 Poppet Seat water jet cutting machine intensifier pump
Both Streamline SL-IV and PRO-III are high-pressure waterjet pump models manufactured by KMT Waterjet Systems. While they share some similarities, there are several differences between these two models:
Pressure Range: The Streamline SL-IV can deliver up to 90,000 psi (6,200 bar) of water pressure, while the PRO-III can deliver up to 125,000 psi (8,620 bar) of water pressure. This means that the PRO-III is capable of higher pressure cutting, which can result in faster cutting speeds and more precise cuts.
Power: The PRO-III is a more powerful pump than the Streamline SL-IV. It has a maximum horsepower of 200 hp, while the Streamline SL-IV has a maximum horsepower of 150 hp. This means that the PRO-III can handle more demanding cutting applications and can cut through thicker materials.
Efficiency: The PRO-III is designed to be more energy-efficient than the Streamline SL-IV. It uses less energy to generate the same amount of cutting power, which can result in lower operating costs.
Noise Level: The PRO-III is quieter than the Streamline SL-IV. It has a lower decibel rating, which can make it more suitable for use in noise-sensitive environments.
Size and Weight: The PRO-III is larger and heavier than the Streamline SL-IV. This can make it more difficult to move and install, but it also means that it has a larger reservoir for abrasive materials, which can result in longer cutting times between abrasive refills.
Overall, the PRO-III is a more powerful, efficient, and capable pump than the Streamline SL-IV. However, it is also more expensive and may not be necessary for all cutting applications. The choice between these two models will depend on the specific needs and requirements of the user.
Item | Part Number | Description |
1 | 20460891 | HP-CYLINDER 1 1/8" X 8" SSEC |
2 | 05039771 | PLUNGER ASSY PMP 875-8 |
3 | 05116769 | SEAL HEAD, ASSY, POPPET, SL-IV |
4 | 05034772 | HEAD, HYDRAULIC CYLINDER, SLIV |
5 | 20422243 | SEAL ASSY SL-IV/V 50 HP HYBRID |
6 | 10110393 | SEAL ASSY, SEAL HEAD, SLIII/IV |
7 | 05059688 | NUT, HP CYLINDER, 3-3/4" SLIV |
8 | 80086622 | HYDRAULIC CARTRIDGE ASSEMBLY |
9 | 05007786 | FLANGE, SEAL HYDRAULIC, |
10 | 20429338 | NUT PLUNGER RETAINER 1.75-20UN |
11 | 80080021 | LINER-HP CYL, 1.12x8.63, |
12 | 10074904 | O-RING, RING, LP WATER INLET, |
13 | 10110401 | RING, SEAL HEAD, LP WATER, |
14 | 05034798 | RING, FLANGE, HYD. SEAL, |
15 | 05034764 | CYLINDER, HYDRAULIC, SLIV |
16 | 10075000 | O-RING, 3-3/4"x4"x1/8" |
17 | 05034855 | RING, BACK-UP, 3-3/4"x42 |
18 | 05141106 | SCREW SOCKET HEAD M14x60 |
19 | 05127584 | SWITCH, PROXIMITY, 24 VDC, |
20 | 10183572 | SCREW SOCKET HEAD, M6-1x30 MM |
21 | 20429322 | HYDRAULIC PISTON PRESSURE INTE |
22 | 05144183 | SPACER, PROXIMITY SWITCH (AB), |
23 | 20418031 | RING RETAINING HYDRAULIC |