TECHNI waterjet SP-69-10 Cylinder liner
The Intelli-TRAX Linear Drive System used in Techni Waterjet's waterjet cutting systems is designed to improve cutting accuracy in several ways.
Firstly, it uses a high-precision linear drive system to control the movement of the cutting head. The linear drive system uses a series of precision bearings and rails to guide the cutting head along the cutting path with extreme accuracy and repeatability. This results in smoother and more precise movements, which translates into more accurate cuts.
Secondly, the Intelli-TRAX system uses advanced motion control algorithms to optimize the cutting path and reduce cutting errors. The system adjusts the cutting speed and acceleration of the cutting head based on the geometry of the cut and the material being cut. This helps to minimize cutting errors and improve accuracy, even when cutting complex shapes or materials with varying properties.
Finally, the Intelli-TRAX system is designed to minimize backlash and other sources of mechanical error. Backlash is a common problem in mechanical systems, where there is a small amount of play or slop in the movement of the components. This can result in imprecise movements and cuts. The Intelli-TRAX system is designed to minimize backlash and other sources of mechanical error, resulting in more accurate and consistent cuts.
Overall, the Intelli-TRAX Linear Drive System is a key component of Techni Waterjet's waterjet cutting systems, helping to improve cutting accuracy and precision, even when cutting complex shapes or challenging materials.
ITEM NO. | DESCRIPTION | PART NUMBER |
1 | Clamp ring | SP4-50 |
2 | M12x1.25x40 SHCS BLK | 110-1-1240 |
3 | Plunger | SP-46-6 |
4 | Internal Circlip | 501-1-0010 |
5 | O-ring | 500-5-0113 |
6 | O-ring | 500-5-0089 |
7 | Seal Housing | SP4-45-195 |
8 | Wiper Seal | SP1051 |
9 | Guide Bush | SP4-46-195 |
10 | M6 x 10 SHCS Black | 108-1-0610 |
11 | HP Seal Kit | SP1062 |
12 | Cylinder Liner | SP4-69-195 |
13 | Cylinder Body | SP-49-15 |
14 | Check Valve Housing | SP-72-10 |
15 | LP Check Valve Spring | 500-12-0040 |
16 | Check Valve Poppet | SP-73-2 |
17 | Sealing Head | SP-71-7 |
18 | O-Ring- BS033 | 500-5-0042 |
19 | Cylinder Retaining Sleeve | SP2-70-5 |
20 | Valve Seat | 500-20-0111 |
21 | Outlet Poppet | 500-20-0113 |
22 | Spring | 500-20-0112 |
23 | Check valve outer body | 500-20-0100 |
Collar | 10078715 | |
Gland nut 3/8" | 10078129 |
If you are interesting in TECHNI Waterjet,Contact us any time.