Pneumatic valve BFT waterjet

Pneumatic valve BFT waterjet

Product Item:Pneumatic valve BFT waterjet
Product Name:BFT waterjet part
Manufacturer: Win Win Waterjet
  • Product Detail

Win Win waterjet provide many kinds of waterjet parts, OEM/ODM available 

Pneumatic valve BFT waterjet  

The BFT pneumatic valve is a type of valve used in a waterjet cutting system to control the flow of water through the system. The pneumatic valve is operated by compressed air and is typically installed in the high-pressure line between the intensifier pump and the cutting head.

The BFT pneumatic valve is designed to allow water to flow in one direction only, from the pump to the cutting head. When the valve is closed, it prevents flow in the opposite direction, which can help protect the pump from damage and ensure proper cutting performance.

The BFT pneumatic valve is typically made from high-strength materials such as stainless steel or brass to withstand the high pressures and flow rates typical of waterjet cutting systems. The valve is controlled by a pneumatic actuator that opens and closes the valve based on a signal from the waterjet cutting system's control panel.

Regular inspection and maintenance of the BFT pneumatic valve is an important part of preventive maintenance for the waterjet cutting system. It is important to inspect the valve for signs of wear or damage, such as leaks, corrosion, or other visible damage. If any issues are identified, the valve should be repaired or replaced as soon as possible to prevent further damage to the system.

Working with an experienced and knowledgeable technician can help ensure that the BFT pneumatic valve is properly installed and maintained. Regular maintenance and inspection of the valve can help prevent issues with the valve and other components of the waterjet cutting system, ensuring that the system is operating at peak performance and reducing the risk of damage or downtime.

In summary, the BFT pneumatic valve is an important component in the waterjet cutting system that helps control the flow of water and protect the pump from damage. Regular inspection and maintenance of the valve can help extend its life and ensure that the waterjet cutting system is operating at peak performance.

BFT.jpg


CP022002/190Cylinder
1200402piston complete
XK121/220Piston sealing
XF56/220Wear ring
CP022066/220Plunger complete
CP022057/075Clamp ring
HT022044/103Retaining ring
034858/220O-ring backring 97
XST17/220Rod sealing 22,0 x 32,7 x 4,2 mm
XST17/220Rod sealing 22,0 x 32,7 x 4,2 mm
XF29/220Rod wear ring 22x27x5,6 mm
D23M20360/046Cylinder head screw
CP022017/172connection flange
CP022016/172connection flange
CP022021/593Thread ring
HT022004/473Piston
CP020030/562Bushing
CP020031/473Guiding
CP020032/562Supporting ring
CP020033/255helical spring
CP020034/255helical spring
CP020034/255Helical spring
S24B20/103Snap ring
xn5/220initiator
XST9/220PLUG
CP022009/779High pressure cylinder
CP022010/527Bearing bush
CP022011/150Sealing
CP022012/780Back ring
9704521/220Quadring
CP022013/014Distance bushing
CP022040/591Valve body
CP022015/527Back ring
XF35/220Rod wear ring
CP022022/591SPLIT RING
CP022018/563Flange
CP022019/563Flange
CP022039/563Flange
D23M20*65/046Cylinder head screw
CP022047/844Pressure valve
CP022019/844suction valve
MA160818/220swivel male elbow
OR0759017/151o-ring75.92*1.78





PREVIOUS:301011-3 Electronic Shift Sensor Assembly for waterjet intensifier pump

NEXT:05034798 Ring flange HYD seal

Leave a Reply

Leave a message

Facebook

Twitter

LinkedIn

+86-17319188243

https://www.tiktok.com/@wwaterjet

whatsapp

[email protected]