wwaterjet 
ITEM NO | DESCRIPTION | PART NUMBER | QTY |
1 | HP Tube | 500-14-0109 | 1 |
2 | 3/8” (06) Socketless hose 1250mm | 206-23-0039 | 1 |
3 | ORTAC hose | 206-23-0030 | 1 |
4 | HP Tube | 500-14-0093 | 1 |
5 | Adaptor insert | SAPS-46-1 | 1 |
6 | Pressure transducer | 700-7-0020 | 1 |
7 | HP Tube | 500-14-0094 | 1 |
8 | Bulkhead | 500-20-0005 | 1 |
9 | 3/8-1/4" adaptor | 10079432 | 1 |
10 | Attenuator clamp | SAP-EL-40 | 2 |
11 | Attenuator pad | SAP-EL-41 | 2 |
12 | Flexible tube 16mm | 206-23-0016 | 1 |
13 | HP Tube | 500-14-0098 | 1 |
14 | Attenuator 1.0L | 500-20-0016 | 1 |
15 | HP Tube | 500-14-0091 | 1 |
16 | Pressure Switch | 700-3-0006 | 1 |
17 | HP Tube | 500-14-0090 | 1 |
18 | HP Tee 3/8" | 10078590 | 3 |
19 | Dump valve | 13244 | 1 |
20 | MAC valve | 500-11-0070 | 1 |
21 | HP Tube | 500-14-0092 | 1 |
22 | Clear tube 6mm | 206-23-0006 | 1 |
23 | HP Tube | 500-14-0108 | 1 |
24 | Stainless ¼” BSP - 09 JIC Nipple | 208-4-0079 | 2 |
25 | 3/8” (06) Socketless hose 1250mm | 206-23-0039 | 1 |
26 | Pressure gauge | 500-21-0025 | 2 |
27 | 1/4-6 F/M Push-in connector | 201-1-0070 | 2 |
28 | 1/2" Nipple | 203-4-0020 | 1 |
29 | Water pump | 500-7-0095 | 1 |
30 | Reducing bush, 3/4""-1/2" | 203-9-3412 | 1 |
31 | 1/2"-16 Elbow push-in connector | 201-2-0045 | 1 |
32 | 1/2" M/F/F Tee | 203-5-0010 | 2 |
33 | 1/2"-1/4" Reducer MF | 203-9-5025 | 2 |
34 | 1/4"-6 Male Push-in T connector | 201-5-0020 | 1 |
35 | 1/2" MF Brass elbow | 203-2-5050 | 1 |
36 | Manifold block | SAPS-47-1 | 1 |
37 | 1/4"BSP- 1/4" Barb fitting | 203-18-0005 | 2 |
38 | Clear tube 6mm | 206-23-0006 | 1 |
39 | Clear tube 6mm | 206-23-0006 | 1 |
40 | 1/2"-16mm straight Push-in connector | 201-1-0060 | 1 |
41 | Ball valve | 203-18-0020 | 1 |
42 | Check valve | 205-17-102 | 1 |
43 | QSS - Push-in bulkhead connector | 201-29-0010 | 1 |
44 | 1/4" Nipple | 203-4-0250 | 1 |
45 | 1/2" Bulk head | 209-29-0010 | 2 |
46 | Diaphragm valve | 205-17-0030 | 1 |
47 | S/S ½” BSP-09 JIC Male 90 deg Elbow | 208-2-0050 | 2 |
48 | S/S 09 JIC – 3/8” (06) hose tail | 208-35-0007 | 4 |
NA | Water Booster pump seal kit | 500-7-0100 | 1 |
NA | Water Booster pump repair kit | 500-7-0096 | 1 |
The ESP 55 NXT High Pressure Cutting Water System by Waterjet includes several advanced features and components designed for efficiency, reliability, and ease of maintenance. Here is a breakdown of the key components and specifications of the system:
Electric Servo Pump (ESP):
Max Output Pressure: 66,000 PSI (4550 BAR)
Max Output Volume: 1.0 GPM (3.8 LPM)
Cooling Water Requirement: 1.6 GPM (6 LPM) at 54°F (12°C)
Noise Level: 70 dB
Power Requirements: 60 Amp
High-Capacity Oil Filters: These ensure that the pump operates smoothly and reduces the need for frequent maintenance.
Larger Plungers: For increased efficiency and durability, allowing the system to handle higher pressures with less wear.
Booster Pump: This component helps maintain consistent water pressure, crucial for high-quality cuts.
Built-in Router for Remote Support: Enables remote diagnostics and troubleshooting, minimizing downtime.
Advanced Diagnostics: Predictive maintenance features use high-tech sensors to monitor the system and anticipate maintenance needs, reducing unplanned downtime.
Quick-Change Seal Design: This design allows for the fastest seal changes in the industry, further reducing maintenance time and costs.
Environmentally Friendly Design: The waterjet pump is up to 60% more efficient than traditional hydraulic intensifiers, reducing energy consumption and operational costs. It also significantly lowers water usage, with savings of up to 290,000 gallons per year compared to typical systems.
These features make the ESP 55 NXT a robust and efficient solution for high-pressure water cutting applications, ensuring smooth operation and minimal environmental impact.
